(status bar message)
Image Placeholder
Log In - Register

Search:
Advanced Search


RE: Crankshaft oilways
Post a reply | Start a new discussion | Main Index | Help

Posted by Wazza (NZ) on Saturday, January 16, 2021 at 06:45
    - in reply to: RE: Crankshaft oilways posted by nigel w on Tuesday, January 12, 2021 at 15:44

This Saudi T160 engine I have here is PN068## and that didnt' have the oil pump back plate

enlarged to 5/16" id bore, it was still at the earlier 1/4" id bore, however the oil tank through into

the engine was all the large 5/16" id bore feed. It's has a very late prodution date engraved into the pump body

so it's definitely the original oil pump.